Ways to Fix Sage 50 Printer Not Activated Error Code 20 Issue



\"Sage 50 Printer Not Activated Error Code 20\" is a common error message that can occur when using the Sage 50 accounting software. This error typically occurs when there is a problem with the configuration of the printer

If you're experiencing the "Sage 50 Printer Not Activated Error Code 20" message on your computer, there's likely a solution waiting for you. In this article, we'll outline the steps you need to take in order to resolve the issue and get your Sage 50 printing back up and running as smoothly as possible.

"Sage 50 Printer Not Activated Error Code 20" is a common error message that can occur when using the Sage 50 accounting software. This error typically occurs when there is a problem with the configuration of the printer settings in Sage 50, or if there is an issue with the printer driver.

What is the Sage 50 Printer Not Activated Error Code 20?

If you are having trouble activating your Sage printer, there may be a simple solution.

Follow these steps to fix the "sage printer not activated error code."

1. Make sure that your computer is connected to the internet and that the printer is turned on.

2. Open your computer's "start" menu and select "run." Type "cmd" into the open field and press enter.

3. At the command prompt, type in "ipconfig /all." This will show you all of your network connections.

4. If your Sage printer is connected to the same network as your computer, you should see its IP address listed under "networks." In most cases, this address will look something like 192.168.1.x.

5. Next, type in "ping 192.168.1.x" and press enter to test whether your printer is working correctly. If the ping succeeds, then you know that your computer and printer are both connected correctly and there is no problem with the activation process itself.

How to Fix Sage 50 Printer Not Activated Error Code 20

To resolve this error, you can try the following steps:

  • Make sure that the printer is properly connected and turned on.
  • Check that the printer driver is up-to-date and compatible with your version of Sage 50 Error 20.
  • Try reinstalling the printer driver. Go to the File menu in Sage 50 and select Printer Setup.
  • Make sure that the correct printer is selected and that the settings are correct.
  • Try to run Sage 50 as an administrator. Check for any pending Windows updates and update the system.
  • If the issue still persists, you may need to contact Sage 50 support for further assistance.

Visit here: Sage 50 Keeps Crashing

If you are experiencing the "Sage 50 Printer Not Activated Error Code 20," there is likely a solution available for you. Checking to see if any of your hardware or software updates have been installed, as well as troubleshooting connectivity and print settings may help solve the issue. In some cases, an installation issue could be to blame and a reinstallation might be necessary. If all else fails, contacting Sage technical support may be your best bet. Thanks for reading!


Reviews



People Also Like

See More